Repair information 4-21
5022-xxx
Operator panel outer bezel removal
See “Outer bezel, C52x” on page 7-3 for the part number for the C52x models. See the same page for the
specific models for the bezels for the C53x models.
1. Using a flathead screwdriver or similar tool, unsnap the locking tabs (A) on the upper left and the upper
right of the outer bezel.
Note: The top portion of the operator panel disengages with the outer bezel. Flex the top of outer bezel to
disengage the operator panel.
2. For models C52x: Remove the outer bezel with the inner bezel (B) attached.
For models C53x: Remove the bezel. The bezel is one piece for this set of models.
Installation note: When reinstalling or replacing the outer bezel, insert the bottom of the bezel first, ensuring
that the outer bezel bottom portion fully seats.
A
B
To Next Page
Loading...
