Repair information 4-83
5022-xxx
Toner level sensor removal
See “Toner level sensor” on page 7-11 for the part number.
Note the locations of the toner sensors.
1. Remove the HVPS. See “High voltage power supply (HVPS) removal” on page 4-62.
2. For yellow and cyan only: Remove the transfer contact assembly. See “Transfer contact assembly
removal” on page 4-92.
Note: Do not remove the springs from the contact assembly as stated in the last step of the procedure.
Yellow
Cyan
Magenta
Black
To Next Page
Loading...
