Lexmark C522 - Low Voltage Power Supply (LVPS) Removal

Repair information 4-65
5022-xxx
Low voltage power supply (LVPS) removal
See “Low voltage power supply, 115/230 V” on page 7-7 for the part number.
1. Remove the right side cover. See “Right cover removal” on page 4-26.
2. Remove the rear cover. See “Rear cover removal” on page 4-25.
3. Unplug the JLVPS1 connector (A) from the system card.
4. Remove the five LVPS mounting screws (B).
5. Disconnect the cable from the LVPS (C).
6. Remove the cable from the cable guide, and remove the LVPS.
A
B
C