Lexmark C522 - Top Access Cover Assembly Removal-Model C52 X Only

4-28 Service Manual
5022-xxx
Top access cover assembly removal—model C52x only
See “Top access cover assembly (network), C520n/C522n/C524n/C524dn” on page 7-3 or “Top access
cover assembly (non-network), C524” on page 7-3 for the part number.
1. Remove the rear cover. See “Rear cover removal” on page 4-25.
2. Remove the left cover. See “Operator panel outer bezel removal” on page 4-21.
3. Remove the fuser. See “Fuser removal” on page 4-60.
4. Remove the four screws (A) exposed after removing the fuser.
5. Remove the operator panel. See “Operator panel assembly removal” on page 4-23.
6. Remove the exit tray. See “Exit tray cover removal” on page 4-15.
A