4-68 Service Manual
5022-xxx
Paper pick mechanism assembly removal
See “Paper pick mechanism assembly, C52x” on page 7-5 or “Paper pick mechanism assembly, C53x”
on page 7-5 for the part number.
1. Remove the rear cover. See “Rear cover removal” on page 4-25.
2. Disconnect the JTRAY1 (A) and JTRAY2 (B) connectors from the system card.
3. Remove all toner cartridges.
4. For models C52x only: If installed, remove the MPF swing arm assembly. See “Multipurpose feeder
(MPF) swing arm assembly removal—models C52x only” on page 4-67.
To Next Page
Loading...
