4-24 Service Manual
5022-xxx
Paper tray dust cover removal
See “Paper tray dust cover with dust cover spring, C53x” on page 7-3 for the part number.
1. Unplug the power cord from the printer.
2. Remove the exit tray. See “Exit tray cover removal” on page 4-15.
3. Remove the paper tray.
4. Place the printer on its back.
5. Remove the four screws (A). The upper right screw can be accessed through a hole in the frame (B).
6. Remove the paper tray dust cover assembly.
7. Lift the dust cover bracket (C), and disconnect the dust cover spring (D).
8. Set the dust cover bracket aside to reuse with the new FRU.
A B
DC
To Next Page
Loading...
