Diagnostic aids 3-29
5022-xxx
Clearing paper jams in the manual feeder
When paper is not placed far enough into the manual feeder, the display prompts you to insert paper.
If the paper is pushed far enough into the manual feeder for the printer to sense it, but not far enough to feed
properly, 200.xx, 200.11, or 201.08 Paper Jam messages appear.
In either case, push the paper farther into the manual feeder.
If the paper does not feed:
1. Remove the paper or envelope.
2. Open the top access cover, and close it.
3. Load the paper, and push the paper in until it stops. The printer should pull it in farther.
Note: Maintain pressure on the paper or envelope until the printer takes the paper from your hand.
To Next Page
Loading...
