4-8 Service Manual
5022-xxx
Left Margin
1. Select Left Margin, and press Select.
2. Adjust the left margin until the points of the left alignment marks touch the edge of the page.
• Pressing the left arrow decreases the value and moves the left alignment marks to the left.
• Pressing the right arrow increases the value and moves the left alignment marks to the right.
3. Press Select ( ) to save the value.
4. Print the Quick Test page, and check the left alignment marks each time until you are satisfied.
Right Margin
1. Select Right Margin, and press Select.
2. Adjust the right margin until the points of the left alignment marks touch the edge of the page.
• Pressing the left arrow decreases the value and moves the right alignment marks to the right.
• Pressing the right arrow increases the value and moves the right alignment marks to the left.
3. Press Select ( ) to save the value.
4. Print the Quick Test page, and check the results. Repeat if necessary.
5. When the registration is complete, proceed to the color alignments.
Alignment (cyan, yellow, and magenta)
1. Press Back ( ) on the operator panel until you reach the top menu, select ALIGNMENT MENU, and
press Select.
2. Select Cyan.
3. Select Top Margin, and use the right and left arrow keys to select zero. Press Select ( ) to save the
setting.
4. Select Left Margin, Right Margin, Bottom Margin, Skew, and Bow. In each menu, use the right and left
arrow keys to select zero, and press Select ( ) to save the value.
It is important to set all the values to zero before starting.
To Next Page
Loading...
