4-48 Service Manual
5022-xxx
Electrophotographic (EP) drive assembly removal—model C52x only
See “EP drive assembly, C52x” on page 7-7 or “EP drive assembly, C53x” on page 7-7 for the part number.
1. Remove the low voltage power supply. See “Low voltage power supply (LVPS) removal” on page 4-65.
2. Open the top access door.
3. Open the front access door.
4. Remove all the toner cartridges.
5. Disconnect the JTRANS2 connector (A) from the system card.
6. Disconnect JCART1 (B) and JCART2 (C) connectors from the drive assembly.
BC
To Next Page
Loading...
