Repair information 4-55
5022-xxx
Front door assembly removal
See the part number for the Front door assembly for the specific model you need on page 7-5.
1. Remove the front access cover assembly. See “Front access door cover assembly removal” on
page 4-16.
2. Remove the rear cover. See “Rear cover removal” on page 4-25.
3. For C52x only: Disconnect the JTRANS1 cable (A) from the system card.
For C53x only: Disconnect the JTRANS2 cable (A) from the system card.
Note: If you have a duplex model, also disconnect the JDUPLX1 cable (B) from the system card.
BA
To Next Page
Loading...
