Lexmark C522 - Top Access Cover Assembly Removal-Model C53 X Only

4-32 Service Manual
5022-xxx
Top access cover assembly removal—model C53x only
See “Top access cover assembly (network), C532n/C534n” on page 7-3 or “Duplex top access assembly
(network), C530dn/C532dn/C534dn” on page 7-3 for the part number.
1. Remove the right cover. See “Right cover removal” on page 4-26.
2. Remove the left cover. See “Operator panel outer bezel removal” on page 4-21.
3. Remove the rear cover. See “Rear cover removal” on page 4-25.
4. Remove the fuser. See “Fuser removal” on page 4-60.
5. Remove the four screws (A) exposed after removing the fuser.
6. Remove the operator panel. See “Operator panel assembly removal” on page 4-23.
7. Remove the exit tray. See “Exit tray cover removal” on page 4-15.
A