5-16 Service Manual
5022-xxx
JPH1 (continued)
31 D_VDO_K-
32 D_VDO_K+
33 Ground
34 D_VDO_Y-
35 D_VDO_Y+
36 Ground
JSBTN1
1 S_SB_Y
2 S_SB_K
3 S_SB_M
4 S_SB_C
5Ground
6 I2C_DATA_SB
7 I2C_CLK_SB
8 +3.3 V dc
JTRANS1
1 VS_JTRANS-1 (+5V) 2Ground
3 I2C_CLK_SB 4I2C_DATA_TB
5 VS_JTRANS-5 (5V SW) 6 TRANS_BELT_SNS
7 TRANS_THERM_SNS 8 VS_5V_TPS
9 VS_JTRANS-9 (+3.3V) 10 TPS_SNS
11 TPS_GAIN_ADJ 12 TPS_SNS_RTN
13 TPS_THERM_SNS 14 N/C
JTRAN2
1 V_TRANS_PHA+
2 V_TRANS_PHA-
3 V_TRANS_PHB+
4 V_TRANS_PHB-
JTRAY1
1 VS_TRAY_INPT_LED
(+5V)
2 S_TRAY_INPUT
3Ground
4 VS_TRAY+5V_NMT
5 TRAY_NMT (+3.3v)
6Ground
7N/C
Connector listing—models C52x
(see “System card (network)—models C52x” on page 5-11 or “System card (non-network)—models C52x” on
page 5-12) (continued)
Connector
Pin no. Signal Pin no. Signal
To Next Page
Loading...
