Lexmark C522 - Page 81

Diagnostic information 2-49
5022-xxx
3
Remove the HVPS. See “High voltage power
supply (HVPS) removal” on page 4-62.
Check for continuity between the contacts
(yellow1 and yellow2, cyan1 and cyan2,
magenta1 and magenta2, or black1 and
black2) on the transfer contact assembly.
Go to step 4. Replace the transfer contact
assembly. See “Transfer
contact assembly
removal” on page 4-92.
Is continuity present?
4 Replace the HVPS. See “High voltage power
supply (HVPS) removal” on page 4-62.
Does the error clear?
Problem solved. Replace the system card.
See “System card
removal” on page 4-79.
Step Questions / actions Yes No
yellow2
cyan2
magenta2
black2
yellow1
cyan1
magenta1
black1