Lexmark M52 Series User Manual

Staple, hole punch finisher top cover removal
1 Remove the staple, hole punch
finisher
left cover. See “Staple, hole punch
finisher
left cover removal” on
page 699.
2 Remove the staple, hole punch finisher right cover. See “Staple, hole punch finisher right cover removal”
on page 701.
3 From the right side, remove the two screws (A).
4 From the left side, remove the two screws (B).
5 Remove the cover.
4064
Parts removal
703

Lexmark M52 Series Specifications

General

Print Technology	Laser
Print Resolution, Black	Up to 1200 x 1200 dpi
Connectivity, Standard	USB 2.0, Ethernet
Network Connectivity	Ethernet
Media Types Supported	Card Stock, Envelopes, Plain Paper, Transparencies
Operating Systems Supported	Windows, macOS, Linux