Lexmark MB2236 - Page 103

Action Yes No
Step 13
a Check the fuser cables for proper connection and damage.
b Check the fuser access door for damage.
c Check if the fuser gears are in proper contact with the drive
gears.
d Make sure that the fuser is compatible with the LVPS.
e Check the fuser for proper installation and damage.
Is the fuser properly installed and free of damage?
Go to step 15. Go to step 14.
Step 14
Replace the fuser. See
“Fuser removal” on page 245.
Does the problem remain?
Go to step 15. The problem is
solved.
Step 15
Check the cables for proper connection and damage.
Are the cables properly connected and free of damage?
Go to step 17. Go to step 16.
Step 16
Replace the damaged cable.
Does the problem remain?
Go to step 17. The problem is
solved.
Step 17
a Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustment > Motor tests
b Select Motor (transport).
c Check if the exit roller turns.
Did the exit roller turn?
Go to step 20. Go to step 18.
Step 18
a Make sure that the redrive gears are in proper contact with the
printer drive gears.
b Check the redrive gears for proper installation and damage.
c Check the roller for wear, contamination, and damage.
Is the redrive properly installed and free of damage?
Go to step 20. Go to step 19.
Step 19
Replace the redrive. See
“Redrive removal” on page 244.
Does the problem remain?
Go to step 20. The problem is
solved.
3400-48x
Diagnostics and troubleshooting
103