Lexus RC300 2017 - Registering a Bluetooth Device; Deleting a Bluetooth Device

44
RC300RC300hNavi(EE)
2-2. Connectivity settings
■ Connecting manually
When the auto connection has failed
or “Bluetooth
*
power” is turned off, it is
necessary to connect Bluetooth
®
manually.
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
1 Display the Bluetooth
®
setup
screen:
 “MENU” button  “Setup”
 “Bluetooth
*
”
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
2 Follow the steps in “Connecting a
Bluetooth
®
device” from step 2.
(P.42)
■ Reconnecting the Bluetooth
®
phone
If a Bluetooth
®
phone is disconnected
due to poor reception from the
Bluetooth
®
network when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>, the system automatically
reconnects the Bluetooth
®
phone.
Up to 5 Bluetooth
®
devices can be
registered.
Bluetooth
®
compatible phones (HFP)
and audio players (AVP) can be regis-
tered simultaneously.
This operation cannot be performed
while driving.
1 Display the Bluetooth
®
setup
screen:
 “MENU” button  “Setup”
 “Bluetooth
*
”
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
2 Select “Add new device”.
 When another Bluetooth
®
device is
connected
 To disconnect the Bluetooth
®
device, select “Yes”.
 When 5 Bluetooth
®
devices have
already been registered
 A registered device needs to be
replaced. Select “Yes”, and select
the device to be replaced.
3 Follow the steps in “Registering a
Bluetooth
®
phone for the first time”
from step 5. (P.37)
This operation cannot be performed
while driving.
1 Display the Bluetooth
®
setup
screen:
 “MENU” button  “Setup”
 “Bluetooth
*
”
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Registering a Bluetooth
®
device
Deleting a Bluetooth
®
device