EasyManua.ls Logo

Lexus RC300 2017 - What to Do if; Troubleshooting

Lexus RC300 2017
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
211
7
RC300RC300hNavi(EE)
7-3. What to do if...
Phone
7-3.Wh at to do if...
■
When using the hands-free system
with a Bluetooth
®
device
The hands-free system or Bluetooth
®
device does not work.
■
When registering/connecting a
cellular phone
A cellular phone cannot be registered.
A Bluetooth
®
connection cannot be
made.
Troubleshooting
If you notice any of the following
symptoms, refer to the likely cause
and the solution, and re-check.
Troubleshooting
Likely cause Solution
The connected
device may not be a
compatible
Bluetooth
®
cellular
phone.
For a list of specific
devices which oper-
ation has been con-
firmed on this
system, check with
any Lexus retailer or
Lexus authorized
repairer, or any relia-
ble repairer.
The Bluetooth
®
ver-
sion of the con-
nected cellular
phone may be older
than the specified
version.
Use a cellular phone
with Bluetooth
®
version 2.0 or higher
(recommended: Ver.
4.1 +EDR or higher).
(P.40)
Likely cause Solution
An incorrect
passcode was
entered on the cellu-
lar phone.
Enter the correct
passcode on the cel-
lular phone.
The registration
operation has not
been completed on
the cellular phone
side.
Complete the regis-
tration operation on
the cellular phone
(approve registra-
tion on the phone).
Old registration
information remains
on either this system
or the cellular
phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then reg-
ister the cellular
phone you wish to
connect to this sys-
tem. (P.44)
Likely cause Solution
Another Bluetooth
®
device is already
connected.
Manually connect
the cellular phone
you wish to use to
this system. (P.42)
Bluetooth
®
function
is not enabled on the
cellular phone.
Enable the
Bluetooth
®
function
on the cellular
phone.

Table of Contents