3. AC Smart Menu
AC Smart
3-4
Monitoring
The bottom left corner of the zone information displays the status information of the zone. When you
select the zone from the icon or list view, the unit information included in the applicable zone is
displayed.
For the status information, the following information is displayed.
Displayed item Description
Total number of units is displayed.
The number of units in operation is displayed.
The number of units in error status is displayed.
The average indoor temperature where the unit is installed is
displayed.
The average set temperature where the unit is installed is displayed.
The number of units operating in cool mode is displayed.
The number of units operating in heat mode is displayed.
The number of units in auto mode is displayed.
The number of units in locked status is displayed.
The number of units in unlock status is displayed.
The number of units in other status is displayed.
Note: Monitoring information
The information about the unit with the communication error (code: 242) displays the result at the
monitoring information for the following items.
- Average indoor temperature, average setting temperature information
- Number of units such as cooling, heating, automatic, lock, unlock
To Next Page
Loading...
