33
ENGLISH
32
SUB FUNCTION SETTING
Energy-Saving Cooling Setting
Energy-Saving cooling function enhances the comfort of the user and to improves the Energy-
Saving performance by controlling the desired temperature during the cooling operation.
This function is only available during the cooling operation.
● The set additional operation is displayed at the top right of the main screen.
- If you press ‘Energy Saving’ button one more time, it will be turned off.
● During the indoor unit operation, press “Energy Saving” button at the top right of the screen.
- The Energy-Saving cooling is set.
● You can also set or turn off the Energy-Saving cooling through the additional operation menu.
● During the indoor unit operation, press the screen’s ‘additional function menu’ button.
- It moves to the additional function selection screen.
SUB FUNCTION SETTING
● If you press ‘Go Back’ or ‘Home’ button, it will exit from the setting menu.
- If no buttons are pressed within 60 seconds after setting functions, it automatically exits from
the setting menu.
● The set additional operation symbol is displayed at the top right of the remote controller main
screen.
NOTE
!
• Plasma Purification is an additional function, and it may not be displayed or performed in
some indoor unit models.
• Air cleaning function can only work when indoor unit is in operation.
• If you want to operate purification only, set the plasma purification in fan mode.
To Next Page
Loading...
Need help?
General
