FUNCTION SETTING
99
ENGLISH
● Press ‘Set’ button.
- It moves to the ‘settings’ screen.
Filter Sign Check
This function gives you the option to view a "Filter Sign" message so that you can check the sta-
tus of the condition of the filter and gauge when it should be changed.
● In the setting menu list, press ‘Filter Sign’ button.
- It moves to the ‘Filter Sign’ setting screen.
● When the filter cleaning indicator is displayed on the top right side of the screen, you can ini-
tialize the filter status by pressing the ‘Reset’ button in the Filter Sign menu.
- When it is the time to clean the filter, the filter icon appears on the top right side of the
screen, and you can enter the Filter Sign menu.
h If your units functionality allows it to display time remaining until the filter cleaning, you can
enter the Filter Sign menu even if the filter cleaning alarm icon is not displayed.
98
FUNCTION SETTING
● If you press ‘Cancel’, ‘Go Back’, or ‘Home’ button, it will exit from the setting screen.
Lock Category Description
All Lock Locks operations of all the buttons of the remote controller.
On/Off Lock Locks the remote controller’s On/Off button.
Mode Lock Locks the remote controller’s operation mode button.
Temperature Range Lock
Sets the remote controller’s desired temperature range which
can be changed only within the set boundary.
To Next Page
Loading...
Need help?
General
