85
ENGLISH
84
ENERGY
● In the Energy Saving screen, press ‘Settings’ button.
- It moves to the Energy saving setting screen.
● In the Energy Saving setting screen, press ‘Energy Usage Limit’ menu.
- It moves to the Target Energy Consumption setting screen.
ENERGY
● The guide to the energy consumption display is as follows.
It is displayed in 3 stages (good, normal, bad) compared to the previous year’s information.
- The display compares each year at the same month (year over year). The three screens
below, show each energy savings scenario. Green indicates a significant energy savings. Yel-
low is a normal or on target energy savings. Red indicates that there was a higher energy
usage than the previous year of the same month.
Target Energy Consumption
This function is that user can set daily amount target usage.
After setting the daily target value, weekly and monthly targets will be calculated and applied au-
tomatically. (Please refer to the "check energy usage" section of this manual. )
The daily target value is used as the reference value in the graph displays of each period (weekly,
monthly, yearly). (Please refer to the "Alarm Popup" section of this manual.)
● Press the remote controller screen’s ‘Energy menu’ button.
- It moves to the Energy Saving screen.
To Next Page
Loading...
Need help?
General
