LG V-NET ACS PREMTA000A - On;Off; Part Description; Operation Setting

OPERATION SETTING
9
On/Off
Air conditioner and ventilator will be turned on or off.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● Press On/Off button in the screen.
- If the product is in operation, Go Back button and Home button will be illuminated.
- If the product is in stop, Go Back button's backlight and Home button's backlight will be off.
● If you press On/Off button during the use, product operation will stop.
8
PART DESCRIPTION
ENGLISH
Home button
Reset hole
Wireless
remote controller
reception part
Operation
display window
and
Touch screen
Back button
Operation display window: Displays operation and setting status
Touch screen: Control of product operation and setting status
*If user presses in many places of touch screen at the same time, touch panel
can’t response
Back button: Move to the previous setting screen
Home button: Move to the default screen
Wireless reception port: Receives wireless remote controller signal
- This feature may be disabled depending on the indoor products.
Reset button: Reset wired remote controller
- If you press the reset hole with a sharp object, the power will be reset.
*If you press it too hard, it may cause failure.
LG Premium Wired remote controller
Accessories
Connecting cable
(1 EA)
Remote controller
fixing screws (4 EA)
User/Installation Manual
OPERATION SETTING PART DESCRIPTION