93
ENGLISH
92
ENERGY
● Press the remote controller screen’s ‘Energy’ button.
- It moves to the Energy screen.
Initialization Usage Data
This function is used to initialize energy and time usage information. Once you initialize the data,
all the usage information will be reset and all the usage data will be deleted.
● In the Energy Saving screen, press ‘Set’ button.
- It moves to the Energy setting screen.
● In the Energy setting screen, press ‘Initialization Usage Data‘ button.
- It moves to the Energy information initialization screen.
ENERGY
● Press ‘OFF/ON’ button to set or turn off the category to use.
- Once you press On, the notice determination period (daily/weekly/monthly) will be displayed
on the screen. Choose the notice determination period.
● After setting the alarm or notice display setting, you can press ‘Back’, ‘Go Back’, or ‘Home’
button, to exit from the screen.
● For the categories with Alarm Popup setting, the popup is displayed on the remote controller
screen when it reaches 80%, 90%, 95%, and 100% of the target usage amount.
Example) Display when it reaches 80% of the target usage amount
To Next Page
Loading...
Need help?
General
