INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
Contents
1 Unpackning & Moving the FlexStep V2 ...................................................................... 4
1.1 Definition ...................................................................................................................................................4
1.2 Unpacking and moving the product .....................................................................................................5
2 Attachment to building ................................................................................................ 7
2.1 Mounting of Wall Profiles without a vertical safety barrier. ..........................................................7
2.1.1 Fixing the wall profiles on the wall ......................................................................................... 7
2.2 Mounting of Wall Profiles with a vertical safety barrier .............................................................. 11
2.2.1 Fixing the wall profiles on the wall .......................................................................................11
2.2.2 Dismantling timing belt system .............................................................................................15
2.2.3 Fitting the Vertical Safety Barrier .........................................................................................17
2.2.4 Assembling timing belt and motor to vertical safety barrier .........................................19
2.2.5 Timing belt tension ..................................................................................................................21
2.2.6 Connecting the vertical safety barrier and testing it .......................................................22
2.3 Mounting of FlexStep V2 to Wall Profiles ....................................................................................... 24
3 Control Unit ................................................................................................................ 27
3.1 Bottom rail .............................................................................................................................................. 27
3.2 Control Boards ...................................................................................................................................... 28
3.3 Control Board Jumpers JP1 ................................................................................................................ 29
3.4 Control Board LED signals ................................................................................................................. 30
3.5 Control Board Microswitches ........................................................................................................... 31
3.6 ON/OFF Switch ..................................................................................................................................... 32
3.7 Mains outlet ............................................................................................................................................ 32
4 Call stations ................................................................................................................. 33
4.1 Standard call station wired .................................................................................................................. 33
4.2 Key Operated Call Stations (2 ways) ............................................................................................... 35
4.3 Wireless Call Stations (wall mounted) ............................................................................................ 36
4.4 How to pair transmitter and receiver ............................................................................................. 37
4.4.1 Wireless call station and receiver ........................................................................................37
4.4.2 Handheld Remote control and receiver .............................................................................38
4.5 ON/OFF Key switch (Optional) ........................................................................................................ 39
5 Setting of Lifting Height and Stair Position ............................................................. 40
5.1 Definition ................................................................................................................................................ 40
5.2 Settings of the 2 stops using the “Liftup Service Tool” ............................................................... 40
5.3 Setting virtual top stop by “Service Mode” .................................................................................... 42
6 Service mode ............................................................................................................... 43
6.1 How to set the System into Service Mode. .................................................................................... 43
6.2 Features in Service Mode NOT CALIBRATED ............................................................................. 43
6.3 Features in Service Mode CALIBRATED ........................................................................................ 43
To Next Page
Loading...
