INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
7.4 Safety Pressure Plates
Below all steps and below the two girders, pressure plates are connected to safety micro
switches. This minimises the risk of getting squeezed below the steps.
The pressure plate micro switches are connected and work in a normally closed circuit
and if activated during downwards motion, the staircase/lifting platform will stop and
move approx. 5 cm upwards.
The safety pressure plates are attached with two screws each.
To Next Page
Loading...
