liftup FlexStep V2 - 12. Maintenance; 12.1 Battery Replacement

INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
32
3.6 ON/OFF Switch
The FlexStep V2 is mounted with an ON/OFF switch for mains supply. The ON/OFF
switch is placed on the bottom of the right hand side control box. Access the switch from
below. Use to turn the power off – e.g. when pairing remote controls.
3.7 Mains outlet
It is possible to mount a mains outlet* behind the foreclosure. Please see illustrations
below for possible placement of mains outlet.
Hole size: (W x H) = 100x120 mm. (not factory standard)
* Please note: Mains outlet is not Liftup A/S supply.
ON/OFF
Switch