EasyManua.ls Logo

liftup FlexStep V2 - Safety Barriers; 6.7.1 Infrared Anti-Crush Safety Device; 6.8.1 Ramp as Safety Barrier

Default Icon
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION & SERVICE MANUAL FLEXSTEP V2 UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
17
2.2.3 Fitting the Vertical Safety Barrier
The three plates that form the vertical safety barrier, are held together by a pin in each
side, for easy mounting on the wall profiles. The pins are factory mounted.
1.
2.
RH side pin/cable
binder
LH side pin/cable
binder

Table of Contents

Other manuals for liftup FlexStep V2

Related product manuals