liftup FlexStep V2 - Emergency Procedures; 6.10.3 Unlocking Onboard Barrier; 6.10.4 Emergency Lighting;Power Failure; 6.10.5 Electrical or Mechanical Faults

INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
22
2.2.6 Connecting the vertical safety barrier and testing it
Connect the cable for connection box (103273) to the connecting board. Operate the
lift to test the movement of the vertical safety barrier.
1.
Mount the cable for connection box (103273) as shown below.
2,
Connect the 2 cables on connector board.