liftup FlexStep V2 - 10.3 Operation from Lower Level; 10.4 Operation on Platform

INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
26
6.
Fix the connecting brackets with 4 M5 screws (2 on the left hand side and 2 on
the right hand side).
7.
Finish the installation by fixing on both sides:
- the side protection A or the brushes if a vertical Safety Barrier is
installed
- the front protection B to hide the fixing holes
- the top cover C
- the side protection D for the Control Unit
- the top cover E
- the girder protection (if you had removed then)
A
C
B
D
E
LH Top
RH Top
LH Bottom
RH Bottom