INSTALLATION & SERVICE MANUAL – FLEXSTEP V2– UK VERSION
1.7
Liftup A/S Hagensvej 21| DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk | CVR DK-1015 3964
Use the up button on the platform to move the product upwards.
Use e.g. a fork lift to remove the FlexStep V2 from the wooden pallet.
During transport of the product, remember to activate the emergency button.
Once at site, it is helpful to move the FlexStep on a rolling table.
NOTE: Remember to always push the emergency button after moving the lift as it may
try to return to staircase immediately.
To Next Page
Loading...
