MMX8x4-HT series – User's Manual 159
ç
Set the Panorama on the Microphone Input
ç <pan_set>
ç
Set the Gain n the Microphone Input
ç <gain_value>
Switch on the Phantom Power
ç <phantom_status>
Set the Phase Inverter on Microphone Input
ç <invertphase_status>
Set the Feedback on Microphone Input
ç <feedback_status>
Set the Highpass Filter on Microphone Input
ç <hpf_status>
ç <lpf_status>
ç <eq_nr><gain_value>
ç <preset_nr>
Advanced Analog Audio Input
Mute the Advanced Analog In
ç <mute_status>
ç <volume_dB>
ç
ç
Set the Balance on the Advanced Analog In
ç <bal_set>
ç
Set the Gain on the Advanced Analog In
ç <gain_value>
Set the Phase Invert on Advanced Analog In
ç <invertphase_status>
Set the Highpass Filter on Advanced Analog In
ç <hpf_status>
ç <lpf_status>
ç <eq_nr><gain_value>
Embedded Audio Input Settings
Set the Audio Channel
ç <in><a_v>
ç <in>.SamplingFreq
Mute the Emb. Audio In
ç <mute_status>
ç <volume_dB>
ç
ç
Set the Balance on the Emb. Audio In
ç <bal_set>
Set the Phase Invert on the Emb. Audio In
ç <invertphase_status>