1
Revision History
Version 31r00
Released: 23 Jan, 2017
Initial version. Build based on LMS7002M Programming and Calibration Guide v2.24.
New register HBD_DLY[2:0] added (address 0x404[15:13]).
Table 1 updated.
Chapters 2.24 and 2.25 added.
New register CMIX_GAIN[2] added (address 0x40C[12]).
Description of register CMIX_GAIN[1:0] changed (address 0x40C[15:14]).
New register CMIX_GAIN[2] added (address 0x208[12]).
Description of register CMIX_GAIN[1:0] changed (address 0x208[15:14]).
RESRV_CGN[3:1] changed to RESRV_CGN[2:1] (address 0x008D[2:0]).
New register CMPLO_CTRL_CGEN added (address 0x008B[14]).
Default value of ICT_VCO_CGEN[4:0] register (address 0x008B[13:9]) changed to 15.
New register ISINK_SPIBUFF[2:0] added (address 0x00A6[15:13]).
New register R5_LPF_BYP_TBB_(1, 2) added (address 0x010B[0]).
New register RZ_CTRL_(SXR, SXT)[1:0] added (address 0x0122[15:14]).
New register CMPLO_CTRL_(SXR, SXT) added (address 0x0122[13]).
Chapter 1.1 updated.
New register LML2_TRXIQPULSE added (address 0x0022[15]).
New register LML2_SISODDR added (address 0x0022[14]).
New register LML1_TRXIQPULSE added (address 0x0022[13]).
New register LML1_SISODDR added (address 0x0022[12]).
Description of registers at addresses 0x0024, 0x0027 updated.
Register name LML1_TX_PST changed to LML1_BB2RF_PST, description updated
(address 0x0025[12:8]).
Register name LML1_TX_PRE changed to LML1_BB2RF_PRE, description updated
(address 0x0025[4:0]).
Register name LML1_RX_PST changed to LML1_RF2BB_PST, description updated
(address 0x0026[12:8]).
Register name LML1_RX_PRE changed to LML1_RF2BB_PRE, description updated
(address 0x0026[4:0]).
Register name LML2_TX_PST changed to LML2_BB2RF_PST, description updated
(address 0x0028[12:8]).
Register name LML2_TX_PRE changed to LML2_BB2RF_PRE, description updated
(address 0x0028[4:0]).
Register name LML2_RX_PST changed to LML2_RF2BB_PST, description updated
(address 0x0029[12:8]).
Register name LML2_RX_PRE changed to LML2_RF2BB_PRE, description updated
(address 0x0029[4:0]).
Register name LML_FIDM2 changed to LML2_FIDM (address 0x0023[5]).
Register name LML_TXNRXIQ2 changed to LML2_RXNTXIQ, description updated
(address 0x0023[4]).
Register name LML_MODE2 changed to LML2_MODE (address 0x0023[3]).
Register name LML_FIDM1 changed to LML1_FIDM (address 0x0023[2]).
Register name LML_TXNRXIQ1 changed to LML2_RXNTXIQ, description updated
(address 0x0023[1]).
Register name LML_MODE1 changed to LML1_MODE (address 0x0023[0]).
To Next Page
Loading...