D9U001GKB-0101 61/150
In such case the safeguard, which is placed under the seat of the chair, is
activated. In case of collision it will prevent from footrest's further moving and
this will prevent from permanent damage of video colposcope or shoulder of
video colposcope by automatic switching off the move of the chair. Control of
the chair does not work until the cause of the collision is removed.
Indication of the collision is placed on the chair base and is described by the
following picture:
Please remove the cause of the collision by lifting footrests and setting
the video colposcope into its parking position. Then control of the chair
can be assumed again.
To Next Page
Loading...