D9U003VS0-0101_01
15
OptiCare for Eleganza 5
► Follow the instructions for use carefully.
► Ensure any user has read and understood the instructions for use completely before operating the product.
► Use OptiCare integrated mattress replacement system exclusively as specied in the instructions for use and in perfect
working order.
► If necessary, check the OptiCare functions daily or at each shift change.
► Use the Eleganza 5 bed exclusively with the correct mains supply.
► Ensure that the OptiCare integrated mattress replacement system is operated exclusively by qualied personnel who have
been trained according to the instructions for use.
► Ensure OptiCare integrated mattress replacement system is operated by qualified personnel trained in using the Eleganza
5 bed in accordance with the instructions for use by manufacturer or by person approved by the manufacturer, eventually
by authorized representative or by person approved by the authorized representative.
► Ensure that the patient (health permitting) has been informed about the operation of the OptiCare integrated mattress
replacement system and all applicable safety instructions.
► Contact service department of the manufacturer immediately to let it replace any damaged parts by the original spare
parts.
► Ensure that maintenance and installation are performed exclusively by qualied personnel who have been trained by the
manufacturer.
► During peak loads or unavoidable excess loads (CPR), adjust Mattress support platform with OptiCare integrated mattress
replacement system to the lowest position.
► Ensure that only one adult patient lies on the OptiCare mattress at any time.
► To avoid injury or crushing, take extra caution when operating any moving parts of the Eleganza 5 bed.
► When using lifting poles or infusion stands, ensure that OptiCare integrated mattress replacement system will not be
damaged when you move or adjust Eleganza 5 bed.
► Keep the Mattress support platform with OptiCare integrated mattress replacement system in the lowest position at any
time when the healthcare personnel are not treating the patient in order to prevent the patient from falling or injuries.
► Ensure that siderails of Eleganza 5 bed are operated exclusively by healthcare personnel.
► Never handle the mains plug of Eleganza 5 bed with wet hands.
► Disconnect Eleganza 5 bed from the mains exclusively by pulling the mains plug.
► When pulling the mains plug, always hold the plug, not the cable.
► Improper handling of mains cable can cause an electric shock hazard, other serious injuries or damage to OptiCare
mattress replacement system.
► Ensure that the stipulated duty cycle of Eleganza 5 bed is not exceeded.
► To prevent failures, use exclusively the manufacturer’s original accessories.
► Ensure that the stipulated safe working load is not exceeded.
► If the patient‘s condition could lead to an entrapment, leave the mattress support platform with OptiCare integrated
mattress replacement system in the at position whilst unattended.
► Do not exceed the maximum patient weight limit of the Eleganza 5 and of the OptiCare integrated mattress replacement
system at the same time.
► Do not use the SCU near ammable gases. (This does not apply to oxygen cylinders.)
► Do not hang anything on any cable.
► Never use OptiCare integrated mattress replacement system near radiators or other heat sources.
► After each emergency situation always check if any of the Eleganza 5 controllers (controllers in siderails, handset or
Attendant Control Panel) is not involuntarily pressed by the bed accessories or by the OptiCare integrated mattress.
► To avoid unintended activation of moving parts during any use of the bed always check that none of the control elements
of the Eleganza 5 bed is pressed by persons, by OptiCare integrated mattress or by other objects.
► Never cover the SCU while in use.
► Never cover the lter of SCU while in use.
To Next Page
Loading...
