D9U003VS0-0101_01
49
OptiCare for Multicare
12.4.11 ALERTS
UNPLUGGED
When the power cable is unplugged or mains power fails, the screen will show the following alert. This alert will automatically
disappear when mains power is restored. Transport mode is activated automatically if no mains power is available to the SCU.
Neither OPT Mode nor MCM Mode will be operational.
NOTE: Red strip above the mattress icon is ashing during this alert.
To eliminate this alert:
► connect the power cable to the socket!
Fig. Alert - Unplugged
ERROR
When a red triangle with exclamation mark appears in the screen the mattress has a system error. The number in the screen is
linked to the type of error. Alerts are indicated also by an acoustic signal.
NOTE: Red strip above the mattress icon is ashing during this alert.
To eliminate an error:
► note down the number and contact service department approved by the manufacturer immediately!
To eliminate an acoustic alert:
► press
icon to mute the alert signal.
Fig. Alert - ERROR
To Next Page
Loading...
