LINET OptiCare - 12.1 Manual CPR (during Transport or Power loss)

D9U003VS0-0101_01
41
OptiCare for Multicare
12.1 Manual CPR (during Transport or Power loss)
OptiCare is equipped with CPR valve on both sides next to the Manual Backrest Release.
To activate manual CPR:
► Open CPR valve on patient’s left- or right-hand side by turning the end of CPR valve to the right and aligning the CPR red
heart with the red circle.
► The mattress will deate.
► The mattress support platform will atten.
NOTE The Mattress support platform will not enter the CPR position unless the CPR Button on the Multiboard is also pressed
and held until the correct position has been reached.
Fig. OPEN CPR VALVE
Fig. Position of the CPR valve on the OptiCare integrated mattress placed on the Eleganza 5 bed