D9U003VS0-0101_01
52
OptiCare for Multicare
12.4.12 POP-UPs
COMPRESSOR (SCU) NOT CONNECTED
When SCU is removed from the bed or communication between the bed and the SCU is lost this POP-UP appears.
NOTE: There is red triangle on this screen instead of the mattress icon during this alert.
To remove this POP-UP:
► install compressor on the bed!
Fig. POP-UP – Compressor Not Connected
Fig. POP-UP – Use Manual CPR
USE MANUAL CPR
When the CPR valves on the mattress sides needs to be activated to de ate mattress for CPR (e. g. during transport or when po-
wer supply is down) this pop-up will appear in the screen.
To Next Page
Loading...
