LU Battery
121
Charging the LU60/LU70 Battery
► To charge the battery:
Insert the battery into the unit and connecting the unit to a standard AC power
source via the external power supply supplied with the unit.
The unit’s external power supply may be operated on any electric system
(110V or 220V) without the need for a transformer. However, it may be
necessary to use an adaptor plug, depending on the type of electrical socket
and outlet available.
Figure 103: LU60/LU70 Video Uplink Unit – Top View
NOTE
When the system is off, the battery that is installed in the system will
discharge to a completely empty condition in about 14 days.
To Next Page
Loading...
