Configuration and Settings
85
5 In the Connect Internet through modem field, select one of the LU’s
cellular modems to be used to connect the LU to the Internet. The
dropdown menu in this field lists the modems installed in the LU.
6 In the Network Name field, enter that name of the Wi-Fi network to
appear on Wi-Fi devices (such as a laptop).
7 In the Network Key field, enter the Network Key that users in the vicinity
of the LU must enter in order to use the LU as an Access Point.
8 You can check the Auto start after connect field, to specify that the LU
automatically operates as an Access Point using this Wi-Fi network after it
powers on.
NOTE
The Auto start after connect checkbox is ignored, if the Power
On, Connect and Play option is selected in the Startup Operation
Settings window, as described on page 102.
9 You can tap the Start button to save these definitions and to start the LU
operating as an Access Point. Alternatively, you can tap the Save button to
save these definitions and then comeback to this window and tap the Start
button at another time.
To stop the LU operating as an Access Point, simply tap the Stop button.
To Next Page
Loading...
