LKC TECHNOLOGIES RETeval - Reflex Testing

Reflex testing
RET eval Device User Manual 19
Reflex testing
Additional testing can be performed on the same patient without having to reenter the patient
and electrode information. To perform multiple tests on the same patient do the following steps:
Step 1: At the end of
the test, press
“Results”.
Step 2: Review the
results of the previous
test.
Step 3: On the last
page of results,
choose “Retest”.
Step 4: Optionally
choose “Change
Protocol” before
proceeding.
This reflex testing process can be repeated indefinitely. All PDF reports performed with reflex
testing will be assembled into one multi-page report. The raw data (rff) files are not combined.