Regulatory and Safety Information
RET
eval
Device User Manual 94
RoHS
RoHS2 Compliance Statement
The RET
eval
product line is RoHS compliant in accordance with EU RoHS Directives 2002/95/EC,
2011/65/EU, 2015/863, and the Council of 8 June 2011 on The restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS Directives). We hereby
declare the restricted materials or substances are not contained therein (the material/substance
is not found above the threshold level listed other than exemptions approved by RoHS). RET
eval
devices are also labeled with the CE mark indicating compliance with RoHS2.
The RoHS directives allow certain exemptions from its declared limits. The RET
eval
device
complies with exemption 6(a) which allows Lead as an alloying element in steel for machining
purposes and in galvanized steel containing up to 0,35 % lead by weight.
China RoHS2 Compliance Statement
The RET
eval
product line is RoHS compliant in accordance with the China RoHS Directive GB/T
26572-2011 on Requirements of concentration limits for certain restricted substances in
electrical and electronic products (RoHS Directives). We hereby declare the restricted materials
or substances are not contained therein (the material/substance is not found above the
threshold level listed except as specifically indicated below).
The stainless-steel weight contained within the RET
eval
charging base may contain trace
amounts of lead that comply with the acceptable limits of the EU RoHS exemption 6(a). Due to
the possible presence of trace amounts of lead in this component the RET
eval
device has been
categorized with an Environment Friendly Use Period (EFUP) of 25 years.
To Next Page
Loading...
