LKC TECHNOLOGIES RETeval - Equipment Identification

Regulatory and Safety Information
RET eval Device User Manual 97
Lot number
Catalog number
Use by date
ETL Listed mark indicating proof of product compliance.
Conforms To:
AAMI Std ES 60601-1, CENELEC EN Std 60601-1, IEC Std 60601-1-6,
IEC Std 60601-1, IEC Std 62366, ISO Std 15004-1, ISO Std 15004-2, IEC
Std 60601-2-40
Certified To:
CSA Std No. 60601-1
Refer to the operation instructions (i.e., this manual) to assure proper and
safe operation.
Equipment identification
Each RET eval device has a unique serial number for identification. The serial number can be
seen by choosing Settings, then System on the user interface. The serial number can also be
found on the bottom of the docking station and under the battery, viewable after removing the
battery cover and pivoting the battery away from the device. The serial number may take the
form of RyyMM######, interpreted as follows:
R
Product code is R
yy
Year manufactured (00-99)
00 = 2000, 01 = 2001, and so on
MM
Month manufactured
JR = January
FR = February
MC = March
AI = April
MA = May
JN = June
JL = July
AS = August
SE = September
OE = October
NE = November
DE = December
######
Production sequence number (5 or 6 digits)
Alternatively, the serial number may take the form R######, interpreted as follows:
R
Product code is R
######
Production sequence number (5 or 6 digits)