Need help?Do you have a question about the LKC TECHNOLOGIES RETeval and is the answer not in the manual?
General| Dimensions | 5.75 in x 3.75 in x 1.75 in (14.6 cm x 9.5 cm x 4.4 cm) |
|---|---|
| Weight | 14 oz (400 g) |
| Connectivity | USB, Bluetooth |
| Power | Rechargeable battery |
| Type | Handheld electroretinograph (ERG) |
| Display | 3.5" color LCD |
| Device Type | Portable ERG (Electroretinography) Device |
| Battery Life | 8 hours |
| Software Compatibility | Windows |
| Electrode Types Supported | DTL, skin |
| Data Storage | Internal memory and export via USB |
Introduction to the RETeval device and its capabilities for retinal diagnostic evaluation.
Lists and describes the items included with the RETeval device package.
Connect the device to power, charge it, and connect the sensor strip lead.
Overview of the device's joystick, power button, and main menu interface.
Configure language, date/time, and backlight for optimal user interface.
Set test options, practice details, report formats, and DR limits.
Manage device system info, firmware updates, and reset settings.
Step-by-step guide for conducting a test on the RETeval device.
Detailed instructions and tips for correctly applying Sensor Strips to the eye.
Instructions for testing the patient's eye, ensuring proper fixation and light blockage.
Steps after test completion, including disconnecting leads and device cleaning.
How to view and interpret test results directly on the RETeval device screen.
Transferring results to a PC via USB for viewing and analysis.
Performing additional tests on the same patient without re-entering data.
Selecting various stimulus conditions and protocols via the protocol chooser.
Detailed explanation of the DR Assessment protocol and its use.
Information on custom protocols and other specific test types.
Methods for deleting stored test results to free up device space.
Procedures for updating firmware and integrating with EMR systems.
Introduction to flicker ERG testing capabilities and protocols.
Details on flicker ERG test protocols and stimulus parameters.
Creating custom protocols and viewing flicker test results.
Introduction to the RETeval-S option for flicker and flash protocols.
Details on RETeval-S protocols, including stimulus types and parameters.
How to view and interpret RETeval-S test results and their parameters.
Overview of the full-featured, ISCEV standard compliant ERG and VEP device.
Details on single-flash, flicker ERG, and VEP protocols for the Complete option.
Steps for performing a flash VEP test according to ISCEV standards.
Explanation of how reference values and intervals are established and used.
Guidance on interpreting patient results against reference data.
How to enable/disable reporting and add custom reference data.
Initial checks for battery, eye testing order, and sensor strip placement.
Resolving issues with missing buttons, electrode noise, and connection errors.
Troubleshooting ambient light, calibration, and start test failures.
Solutions for PC connection, Windows errors, and non-measurable results.
Resetting device settings and handling reported error codes.
Intended use, indications, applicability, and latex statement for the device.
Technical specifications, contraindications, cleaning, disinfection, and storage.
Service, repairs, product performance expectations, and device lifetime.
Key safety precautions, operating environment, and electromagnetic compatibility guidelines.
Manufacturer declarations on emissions, immunity, and recommended RF separation distances.
Explanation of symbols, ETL listing, serial number identification, and product approvals.
Information on how to contact LKC Technologies for technical assistance.
Details of the instrument's warranty terms, conditions, and repair process.
List of available supplies and accessories with part numbers for purchase.
To Next Page
