LNS QUICK SIX - A023 - Servo Drive Alarm

Chapter 1: Alarms
QUICK SIX
1-13
A023 – Servo Drive Alarm
SERVO DRIVE ALARM!
-TURN OFF MAIN POWER
-WAIT FOR 2 SECONDS
-RESTORE MAIN POWER
IF PROBLEM PERSISTS
REFER TO INSTRUCTION
MANUAL
A023
Description:
The Servo Drive Alarm occurs if the Mitsubishi servo amplifier generates an alarm.
Solution:
Turn the main power off to the Quick Six for 2 seconds and turn the power back on.
Note: If the alarm keeps recurring, check the alarm code on the Mitsubishi servo
amplifier and refer to Mitsubishi Servo Amplifier Alarm List.