LNS QUICK SIX - A046 - Chuck Closed Prior to Feed out Complete

1-20 Chapter 1: Alarms
QUICK SIX
A046 – Chuck Closed Prior to Feed Out Complete
CLAMPING DEVICE HAS
CLOSED PRIOR TO
COMPLETING THE
FEED OUT!
POSSIBLE CAUSES:
-LATHE PROGRAMMING
ERROR
-CLAMPING SIGNAL
FAULTY (PLC INPUT
A1) A046
Description:
The Clamping Device Has Closed Prior To Completing The Feed Out alarm occurs if the input for the clamping device closed is
detected before the value of the Input Part Length parameter is reached.
Solution:
 Verify that the clamping device is closing properly and that the Clamping Signal Active interface parameter is set in conjunction with
how the interface signal is being sent.
 Verify that the correct part length has been entered in the PARAMETERS RELATED TO APPLICATIONS menu.