LNS QUICK SIX - A082 - Bar Dropping Fingers Malfunction

Chapter 1: Alarms
QUICK SIX
1-31
A082 – Bar Dropping Fingers Malfunction
BAR DROPPING
FINGERS MALFUNCTION!
POSSIBLE CAUSES:
- SIGNAL SWITCH SQ15
DEFECTIVE OF MIS-
ADJUSTED
- MECHANICAL PROBLEM
- DEFECTIVE MOTOR
A082
Description:
The Bar Dropping Fingers Malfunction alarm occurs when the bar dropping fingers are returning to the home position and input signal
(I2.3 – SQ15) does not turn on.
Solution:
 Force the bar feed to do a home reference. (See Reference Procedure.)
 Check the adjustment and functionality of the SQ15 switch.
 Consult local LNS agency for more information.