ZENIT
29
CONFIGURATION
Section
The sections describe the configuration of the clearer system.
Each single section comprises a contiguous group of spindles
(a contiguous spindle range) with identical AWE and identical
sensing head.
During startup or after a reset, the AWE Zenit L2 (Level 2)
recognizes automatically the AWE type and the sensing head
type.
!
The correct configuration of the section is impor-
tant as otherwise the functionality of this produc-
tion group is reduced.
The functionality of a section is ensured only
when AWE Zenit L2 is displayed.
If only AWE Zenit is displayed, this means that an
AWE with an older, incompatible software ver-
sion was used on this spindle! In this case, Loepfe
can no longer guarantee the correct function of
the equipment!
To Next Page
Loading...
