ZENIT
49
YARN STRUCTURE
MM Lot
These fields are active only when MillMaster is connected.
Running / Stop
Current status of the lot: Running
The data acquisition of the lot can be stopped with Stop.
The following message box is shown:
“Stop production? Yes /No”
Production is manually stopped with Yes. MillMaster receives
a message and data acquisition is stopped for this lot (pro-
duction group).
Stopped / Start
Current status of the lot: Stopped
The data acquisition of the lot can be started with Start.
The following message is shown:
“Start production? Yes/No”
Production is manually started with Yes. MillMaster receives
a message and data acquisition is started for this lot (produc-
tion group).
To Next Page
Loading...
