ZENIT
43
YARN STRUCTURE
Off Count
These settings make possible the detection of false bobbins
or yarn with a larger off-count deviation.
+ DiaDiff /– DiaDiff
Depending on the quality or irregularity of the yarn, a dia-
meter deviation between ±3% and ±44% (difference to ba-
sic value) can be selected. It can be set independently for the
positive as well as negative diameter deviation.
Coarse / Fine
According to the diameter deviation set, the yarn count devia-
tion is displayed for Coarse and Fine.
CntLen
The reference length in which the average diameter differ-
ence is determined can be set between 10 and 50 m. This
allows for optimizing the detection of bobbin misplacements
and count variations.
+ Cuts /– Cuts
The number of cuts due to a positive or negative deviation of
the yarn diameter are listed separately.
This display makes possible the optimizing of the settings.
Short Off Count
CntLen
As opposed to the yarn count channel, the shorts count chan-
nel allows separate acquisition of yarn with a count devia-
tion over a length of less than 10 m. The reference length
determining the average yarn count deviation can be set be-
tween 1 and 32 m.
To Next Page
Loading...
