28
ZENIT
CONFIGURATION
Configuration
Basic system settings.
System
CheckLen Splice
Yarn length with which the splice check is performed after
a cut or after a restart. The splice check length is automat-
ically set to 25 cm. It can be changed to a value between
0 and 120 cm.
Set CheckLenSplice to 0 cm to deactivate the splice check.
Total Spindles
Enter the number of installed spindles for this machine.
Headstock
Input of machine head location: Left or right.
Alarm Display
Selection of alarms to be displayed in a message box.
None No alarms are displayed
All All alarms are displayed
Technical Only the technical alarms are displayed:
System Alarm, Offline, etc.
Textile Only the “textile” alarms are displayed:
Off Count, Cluster, etc.
The respective error messages are displayed in the Dialog
menu under Reports.
Yarn Count
The yarn numbering system (Nm, Nec, New, Tex, Den) is
selectable.
To Next Page
Loading...
